Page History

OpenNaaS concepts

OpenNaaS is a framework which is based on the OSGi technology. OSGi consists of a set of components (named bundles) which provide required logic. OpenNaaS includes many bundles providing resources and capabilities abstraction (see System Architecture section). When running OpenNaaS (see Getting started section), all its bundles are loaded and exported functionality is available through the command line.

Run OpenNaaS

To start OpenNaaS, launch the executable named opennaas in the following folder:

/platform/target/opennaas-${project.version}/opennaas-${project.version}/bin

So, for version 0.10 on linux, you will run it as follows:

cd opennaas/platform/target/opennaas-0.10/opennaas-0.10/
./bin/opennaas.sh

By default, OpenNaaS will open a CLI prompt on the terminal. To avoid this you can execute it this way:

cd opennaas/platform/target/opennaas-0.10/opennaas-0.10/
./bin/opennaas.sh server

Please note that you will have to configure Karaf's SSH daemon to login the CLI via regular SSH.

Creating resources

First step in OpenNaaS is registering existing infrastructure. For this tutorial, there is a single router device to be registered.

In order to register a resource, a resource descriptor file is required. This file describes resource device type and name, all capabilities OpenNaaS should load for it, and what drivers will it use. More information about the Resource descriptor concept is available in System Architecture section.

A descriptor from the project examples directory, or a custom one can be used.

The CLI command to register a device with this descriptor will be:

resource:create /path/to/descriptor/resource.descriptor

Note: For this guide, we used a router descriptor, specifying junos20 as name.

Registering protocol contexts

Each resource can use many different protocols to communicate with the physical device it represents. Required protocols are determined by the driver in use. For a resource to be able to use a required protocol, a Protocol Context is needed. Protocol Context stores all required information to communicate with the device using a protocol known to OpenNaaS.

In this example we're going  to use netconf protocol. Hence, we introduce all netconf Protocol Context required data:

• protocol type
• authentication type
• uri
• authentication parameters

The following command illustrates how to register a protocol context for our resource using password authentication:

protocols:context router:junos20 netconf password ssh://myuser:mypassword@193.1.190.254:22/netconf

and the following, using key authentication:

protocols:context router:junos20 netconf publickey ssh://myuser@193.1.190.254.22/netconf privateKeyPath {key-passphrase}

Notice that only one context per protocol type is registered in a resource. Last one lasts.

Starting resources

A resource will populate its model and enable all its capabilities when started. Hence, in order to operate with it using opennaas, it must be started.

To start it, we use the following command:

resource:start router:junos20

Doing operations with resources

A resource includes a set of capabilities or features. These capabilities determine the set of available operations for this resource.

OpenNaaS supported capabilities are specified in this section.

Please, remember that capabilities to load for a particular resource are specified in the resource descriptor.

Removing resources

Finally, if the resource isn't needed anymore, it can be stopped and removed. First, we stop it:

resource:stop router:junos20

The resource will deactivate all its capabilities and it will be reset. After, we'll destroy it and delete any resource information in OpenNaaS.

resource:remove router:junos20